|
|
1252 datasets found! (Query time: 2 ms)
<< PREV | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | NEXT >>
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Interstitial water geochemistry results of IODP Hole 386-M0091D
| Abstract: |
Results of interstitial water (IW) geochemistry analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. Sampling for IW geochemistry took place offshore immediately upon core recovery using Rhizon samplers. A total amount of approximately 15 mL IW per sample were extracted from the core sections over a maximum rhizon retention time of 6 hours. IW main samples were subsequently split into as many as seven fractions for the following IODP standard measurements: sulfide (1.5 mL IW + 0.6 mL ZnAc 2.5%), salinity (0.5–1.5 mL), pH and alkalinity (3–4 mL), ammonium (0.5–1.5 mL), cations (3 mL IW + 0.03 mL HNO3), and anions (3 mL). […] |
| Size: |
480 data points |
https://doi.org/10.1594/PANGAEA.979666 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (shear vane) from IODP Hole 386-M0095B
| Abstract: |
Shear strength from automated shear vane (AVS) of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a Wykeham-Farrance AVS. The apparatus consists of four vanes perpendicular to each other that are inserted in the sediment to their full length while attempting to minimize disturbance to the sediment. A motor loads a helical torsion spring and the bottom of the spring is united to the vane. Therefore, the bottom deflection of the spring records the angular displacement of the sediment, from which undrained shear strength has been calculated. […] |
| Size: |
30 data points |
https://doi.org/10.1594/PANGAEA.975392 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Line scan images of IODP Hole 386-M0087A
| Abstract: |
Collection of line scan images from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. Images were obtained during the onshore phase of the expedition, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting high-resolution (100 pixels/cm) images of each core sections archive half was captured using the Tri-Sensor Core Logger (TSCL; NS Design). The camera provides a 16-bit red-green-blue color (48-bit) TIFF file, which were converted to JPG files for publication purposes. The RGB data derived from each image for each section are published under titles "Color data (RGB) of IODP Hole 386-M0087A". […] |
| Size: |
8 data points |
https://doi.org/10.1594/PANGAEA.976191 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Foraminifera occurrences of IODP Hole 386-M0091A
| Abstract: |
Results of Foraminifera assemblage analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the offshore phase, micropaleontology samples were taken from the end of split cores at 5 m intervals. During the onshore phase approximately 2 cubic centimetres of sediment from each of these samples were analysed for foraminifera. After drying overnight in a ~40°C oven, samples were disaggregated in a solution of deionized water, Calgon, and H2O2 to ensure removal of clay-sized particles. Samples were then wet sieved through a 63 μm mesh sieve and rinsed with deionized water. The coarse fraction was placed on filter paper in an oven at ~40°C until it dried completely. […] |
| Size: |
28 data points |
https://doi.org/10.1594/PANGAEA.979414 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-ray diffraction results from IODP Hole 386-M0083B
| Abstract: |
Results of X-ray diffraction (XRD) analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
| Size: |
376 data points |
https://doi.org/10.1594/PANGAEA.978934 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Core summary for IODP Site 386-M0085
| Abstract: |
List of recovered cores from the above given site on International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. Cores have been acquired by the use of a Giant Piston Coring (GPC) System. The GPC system consists of a set of two coring barrels - a piston corer and a trigger corer. According to IODP core type nomenclature, cores retrieved from the piston corer barrel are labelled by the letter "H" (for hydraulic piston corer) and those from the trigger corer are identified by the core type letter "P" (for push corer). For further methodological information see methods chapter in Strasser, M. et al., 2023 https://doi.org/10.14379/iodp.proc.386.102.2023 |
| Size: |
40 data points |
https://doi.org/10.1594/PANGAEA.974831 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Moisture and density (MAD) from IODP Hole 386-M0085C
| Abstract: |
Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for MAD measurements (bulk density, dry density, grain density, water content, porosity, and void ratio) were taken from the work halves using 10 cubic centimetre syringes at an approx. down-core resolution of every 2 meters. Sampling depths were adapted and slightly modified for layers of special interest, such as tephras. Samples were processed and measured directly after sampling onboard Chikyu. For the measurements themselves samples were transferred to glass beakers of known weight and volume. […] |
| Size: |
9 data points |
https://doi.org/10.1594/PANGAEA.977447 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Moisture and density (MAD) from IODP Hole 386-M0093A
| Abstract: |
Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for MAD measurements (bulk density, dry density, grain density, water content, porosity, and void ratio) were taken from the work halves using 10 cubic centimetre syringes at an approx. down-core resolution of every 2 meters. Sampling depths were adapted and slightly modified for layers of special interest, such as tephras. Samples were processed and measured directly after sampling onboard Chikyu. For the measurements themselves samples were transferred to glass beakers of known weight and volume. […] |
| Size: |
9 data points |
https://doi.org/10.1594/PANGAEA.977475 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Core close-up images of IODP Hole 386-M0082D
| Abstract: |
Collection of split cores' close-up images from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. Images were obtained during the onshore phase of the expedition, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. Close-up photos were taken utilizing a standard photo camera by sedimentologists during visual core description. Decision on imaged intervals was subject to the core describers in charge. […] |
| Size: |
140 data points |
https://doi.org/10.1594/PANGAEA.976333 - Score: 6.245
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Physical properties (MSCL) of IODP Hole 386-M0083E
| Abstract: |
Multi-Sensor Core Logger (MSCL) data (P-wave velocity, gamma ray attenuation (GRA) density, magnetic susceptibility, natural gamma radiation (NGR), noncontact resistivity (NCR)) from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). These data were obtained from whole round core sections by means of a Geotek MSCL during the offshore phase of the expedition. The offshore phase of expedition 386 took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. As the aforementioned parameters are sensitive to temperature core sections were stored for at least 6 hours after arrival on deck before measurement to allow for temperature equilibration. The core physical properties were measured at predetermined optimal instrument-based spatial and temporal sampling intervals. […] |
| Size: |
164 data points |
https://doi.org/10.1594/PANGAEA.974898 - Score: 6.245
<< PREV | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | NEXT >>
|
