|
|
1251 datasets found! (Query time: 3 ms)
<< PREV | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | NEXT >>
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Physical properties (MSCL) of IODP Hole 386-M0086B
| Abstract: |
Multi-Sensor Core Logger (MSCL) data (P-wave velocity, gamma ray attenuation (GRA) density, magnetic susceptibility, natural gamma radiation (NGR), noncontact resistivity (NCR)) from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). These data were obtained from whole round core sections by means of a Geotek MSCL during the offshore phase of the expedition. The offshore phase of expedition 386 took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. As the aforementioned parameters are sensitive to temperature core sections were stored for at least 6 hours after arrival on deck before measurement to allow for temperature equilibration. The core physical properties were measured at predetermined optimal instrument-based spatial and temporal sampling intervals. […] |
| Size: |
3712 data points |
https://doi.org/10.1594/PANGAEA.974917 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color data (RGB) of IODP Hole 386-M0092A
| Abstract: |
Color data obtained from split core sections from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology) during the onshore phase. The onshore phase of expedition 386 took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, high-resolution (100 pixels/cm) images of archive half was captured using the Tri-Sensor Core Logger (TSCL; NS Design). The camera provides a 16-bit red-green-blue (RGB) color (48-bit) TIFF file from which the RGB data were derived in 1 mm down-core resolution. […] |
| Size: |
37897 data points |
https://doi.org/10.1594/PANGAEA.975077 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Physical properties (MSCL) of IODP Hole 386-M0087C
| Abstract: |
Multi-Sensor Core Logger (MSCL) data (P-wave velocity, gamma ray attenuation (GRA) density, magnetic susceptibility, natural gamma radiation (NGR), noncontact resistivity (NCR)) from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). These data were obtained from whole round core sections by means of a Geotek MSCL during the offshore phase of the expedition. The offshore phase of expedition 386 took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. As the aforementioned parameters are sensitive to temperature core sections were stored for at least 6 hours after arrival on deck before measurement to allow for temperature equilibration. The core physical properties were measured at predetermined optimal instrument-based spatial and temporal sampling intervals. […] |
| Size: |
160 data points |
https://doi.org/10.1594/PANGAEA.974920 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Core summary for IODP Site 386-M0091
| Abstract: |
List of recovered cores from the above given site on International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. Cores have been acquired by the use of a Giant Piston Coring (GPC) System. The GPC system consists of a set of two coring barrels - a piston corer and a trigger corer. According to IODP core type nomenclature, cores retrieved from the piston corer barrel are labelled by the letter "H" (for hydraulic piston corer) and those from the trigger corer are identified by the core type letter "P" (for push corer). For further methodological information see methods chapter in Strasser, M. et al., 2023 https://doi.org/10.14379/iodp.proc.386.102.2023 |
| Size: |
40 data points |
https://doi.org/10.1594/PANGAEA.974838 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0083A
| Abstract: |
Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. […] |
| Size: |
6 data points |
https://doi.org/10.1594/PANGAEA.975416 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0081D
| Abstract: |
Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. […] |
| Size: |
114 data points |
https://doi.org/10.1594/PANGAEA.975409 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color data (RGB) of IODP Hole 386-M0083E
| Abstract: |
Color data obtained from split core sections from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology) during the onshore phase. The onshore phase of expedition 386 took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, high-resolution (100 pixels/cm) images of archive half was captured using the Tri-Sensor Core Logger (TSCL; NS Design). The camera provides a 16-bit red-green-blue (RGB) color (48-bit) TIFF file from which the RGB data were derived in 1 mm down-core resolution. […] |
| Size: |
29197 data points |
https://doi.org/10.1594/PANGAEA.975037 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color data (RGB) of IODP Hole 386-M0083D
| Abstract: |
Color data obtained from split core sections from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology) during the onshore phase. The onshore phase of expedition 386 took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, high-resolution (100 pixels/cm) images of archive half was captured using the Tri-Sensor Core Logger (TSCL; NS Design). The camera provides a 16-bit red-green-blue (RGB) color (48-bit) TIFF file from which the RGB data were derived in 1 mm down-core resolution. […] |
| Size: |
1422587 data points |
https://doi.org/10.1594/PANGAEA.975036 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color data (RGB) of IODP Hole 386-M0092B
| Abstract: |
Color data obtained from split core sections from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology) during the onshore phase. The onshore phase of expedition 386 took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, high-resolution (100 pixels/cm) images of archive half was captured using the Tri-Sensor Core Logger (TSCL; NS Design). The camera provides a 16-bit red-green-blue (RGB) color (48-bit) TIFF file from which the RGB data were derived in 1 mm down-core resolution. […] |
| Size: |
1177549 data points |
https://doi.org/10.1594/PANGAEA.975078 - Score: 5.405
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0090A
| Abstract: |
Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. […] |
| Size: |
3 data points |
https://doi.org/10.1594/PANGAEA.975445 - Score: 5.405
<< PREV | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | NEXT >>
|
