|
1251 datasets found! (Query time: 4 ms)
<< PREV | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | NEXT >>
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (handheld penetrometer) from IODP Hole 386-M0090B
Abstract: |
Shear strength from handheld penetrometer of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a handheld (pocket) penetrometer equipped with a 10 mm diameter tip. The tip was pushed 6.3 mm perpendicular to the split core surface with the measuring pin downward until the groove marked on the tip was even with the level of the core surface. The resulting resistance (compressive strength) was read from the device and used to calculate undrained shear strength. At each measurement depth, three measurements were conducted and the resulting undrained shear strength averaged. […] |
Size: |
40 data points |
https://doi.org/10.1594/PANGAEA.977745 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-ray diffraction results from IODP Hole 386-M0085B
Abstract: |
Results of X-ray diffraction (XRD) analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
Size: |
334 data points |
https://doi.org/10.1594/PANGAEA.978946 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color Reflectance (Spectrophotometer) of IODP Hole 386-M0087B
Abstract: |
Color reflectance spectrophotometry and colorimetry data from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The data where obtained during the onshore phase of expedition 386 which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, each archive half was scanned by the Tri-Sensor Core Logger (TSCL; NS Design) including a noncontact imaging spectrophotometer (MetaVue VS3200; X-Rite), recording data at 2-cm sampling interval. The obtained data is represented in the L*a*b* color coordinate system, where L* is a total reflectance index ranging 0%–100%, a* is green (<0) to red (>0) chromaticity, and b* is blue (<0) to yellow (>0) chromaticity. L*a*b* values were transferred into RGB values using the MATLAB routine lab2rgb. […] |
Size: |
35492 data points |
https://doi.org/10.1594/PANGAEA.975171 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Total carbon, total organic carbon, total inorganic carbon and total sulfur (solid-phase discrete samples) from IODP Hole 386-M0088D
Abstract: |
Total carbon (TC), total organic carbon (TOC), total inorganic carbon (TIC) and total sulfur (TS) from solid-phase discrete samples of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
Size: |
114 data points |
https://doi.org/10.1594/PANGAEA.975628 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-Ray fluorescence (XRF) of discrete samples from IODP Hole 386-M0086A
Abstract: |
Results of X-Ray fluorescence (XRF) on discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
Size: |
20 data points |
https://doi.org/10.1594/PANGAEA.979583 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color data (RGB) of IODP Hole 386-M0083E
Abstract: |
Color data obtained from split core sections from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology) during the onshore phase. The onshore phase of expedition 386 took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, high-resolution (100 pixels/cm) images of archive half was captured using the Tri-Sensor Core Logger (TSCL; NS Design). The camera provides a 16-bit red-green-blue (RGB) color (48-bit) TIFF file from which the RGB data were derived in 1 mm down-core resolution. […] |
Size: |
29197 data points |
https://doi.org/10.1594/PANGAEA.975037 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Moisture and density (MAD) from IODP Hole 386-M0083A
Abstract: |
Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for MAD measurements (bulk density, dry density, grain density, water content, porosity, and void ratio) were taken from the work halves using 10 cubic centimetre syringes at an approx. down-core resolution of every 2 meters. Sampling depths were adapted and slightly modified for layers of special interest, such as tephras. Samples were processed and measured directly after sampling onboard Chikyu. For the measurements themselves samples were transferred to glass beakers of known weight and volume. […] |
Size: |
9 data points |
https://doi.org/10.1594/PANGAEA.977433 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (handheld penetrometer) from IODP Hole 386-M0083D
Abstract: |
Shear strength from handheld penetrometer of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a handheld (pocket) penetrometer equipped with a 10 mm diameter tip. The tip was pushed 6.3 mm perpendicular to the split core surface with the measuring pin downward until the groove marked on the tip was even with the level of the core surface. The resulting resistance (compressive strength) was read from the device and used to calculate undrained shear strength. At each measurement depth, three measurements were conducted and the resulting undrained shear strength averaged. […] |
Size: |
76 data points |
https://doi.org/10.1594/PANGAEA.977717 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color Reflectance (Spectrophotometer) of IODP Hole 386-M0084F
Abstract: |
Color reflectance spectrophotometry and colorimetry data from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The data where obtained during the onshore phase of expedition 386 which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, each archive half was scanned by the Tri-Sensor Core Logger (TSCL; NS Design) including a noncontact imaging spectrophotometer (MetaVue VS3200; X-Rite), recording data at 2-cm sampling interval. The obtained data is represented in the L*a*b* color coordinate system, where L* is a total reflectance index ranging 0%–100%, a* is green (<0) to red (>0) chromaticity, and b* is blue (<0) to yellow (>0) chromaticity. L*a*b* values were transferred into RGB values using the MATLAB routine lab2rgb. […] |
Size: |
65284 data points |
https://doi.org/10.1594/PANGAEA.975161 - Score: 6.035
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (handheld penetrometer) from IODP Hole 386-M0091A
Abstract: |
Shear strength from handheld penetrometer of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a handheld (pocket) penetrometer equipped with a 10 mm diameter tip. The tip was pushed 6.3 mm perpendicular to the split core surface with the measuring pin downward until the groove marked on the tip was even with the level of the core surface. The resulting resistance (compressive strength) was read from the device and used to calculate undrained shear strength. At each measurement depth, three measurements were conducted and the resulting undrained shear strength averaged. […] |
Size: |
4 data points |
https://doi.org/10.1594/PANGAEA.977748 - Score: 6.035
<< PREV | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | NEXT >>
|