Portal for
  • Bremen Core Repository Curation Data
  • Mission Specific Platform Expedition Data
 

Search for:
 
 
Windrose

1251 datasets found! (Query time: 3 ms)

<< PREV | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | NEXT >>

  1. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color Reflectance (Spectrophotometer) of IODP Hole 386-M0087D
    Abstract:  Color reflectance spectrophotometry and colorimetry data from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The data where obtained during the onshore phase of expedition 386 which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, each archive half was scanned by the Tri-Sensor Core Logger (TSCL; NS Design) including a noncontact imaging spectrophotometer (MetaVue VS3200; X-Rite), recording data at 2-cm sampling interval. The obtained data is represented in the L*a*b* color coordinate system, where L* is a total reflectance index ranging 0%–100%, a* is green (<0) to red (>0) chromaticity, and b* is blue (<0) to yellow (>0) chromaticity. L*a*b* values were transferred into RGB values using the MATLAB routine lab2rgb. […]
    Size:  50692 data points
    https://doi.org/10.1594/PANGAEA.975173 - Score: 6.034
  2. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Description of lithologic section units of IODP Hole 386-M0094B
    Abstract:  Description of lithologic section units from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The content of this dataset is based on the visual core descriptions (VCD) done by sedimentologists during the onshore phase of expedition 386 (2022-02-14 – 2022-03-15 onboard D/V Chikyu). For digitalization of the information, content of the hand-drawn VCD sheets was transferred into the Drilling Information System database. The present dataset forms the basis for the digital lithologic columns and composite plots archived under the titles "Visual core description of IODP Hole 386-M0094B". […]
    Size:  1454 data points
    https://doi.org/10.1594/PANGAEA.978147 - Score: 6.034
  3. Strasser, M; Ikehara, K; Everest, JD et al. (2025): P-wave velocity of discrete samples (DPW) from IODP Hole 386-M0089D
    Abstract:  P-wave velocity data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for P-wave velocity measurements were taken from the work halves approx. every 2 meter down core using syringes with an inner diameter of 2 cm. Samples measured 2.5–3 cm long for a sample volume of ~10 cubic centimetres. Samples were then shipped to the European Petrophysics Consortium (EPC) laboratory at the University of Leicester (UK) for processing. Measurements were performed with a Geotek P-wave logger for discrete samples (PWL-D). Measurements were attempted for each sample, however, the unconsolidated lithology of some samples proved unsuitable for the instrument (e.g. too soupy or too friable to be placed between the transducers). […]
    Size:  51 data points
    https://doi.org/10.1594/PANGAEA.975304 - Score: 6.034
  4. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (handheld penetrometer) from IODP Hole 386-M0087C
    Abstract:  Shear strength from handheld penetrometer of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a handheld (pocket) penetrometer equipped with a 10 mm diameter tip. The tip was pushed 6.3 mm perpendicular to the split core surface with the measuring pin downward until the groove marked on the tip was even with the level of the core surface. The resulting resistance (compressive strength) was read from the device and used to calculate undrained shear strength. At each measurement depth, three measurements were conducted and the resulting undrained shear strength averaged. […]
    Size:  4 data points
    https://doi.org/10.1594/PANGAEA.977734 - Score: 6.034
  5. Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-Ray fluorescence (XRF) of discrete samples from IODP Hole 386-M0088B
    Abstract:  Results of X-Ray fluorescence (XRF) on discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […]
    Size:  180 data points
    https://doi.org/10.1594/PANGAEA.979590 - Score: 6.034
  6. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Natural remanent magnetization data from IODP Hole 386-M0084D
    Abstract:  Natural remanent magnetization (NRM) data from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. Because the diameter of the split section (12.5 cm) is larger than the magnetometer entrance (8.1 cm), U-channel samples were taken from the center of each working half during the onshore phase. Measurements were conducted likewise during the onshore phase using the long-core superconducting rock magnetometer (2G Enterprises, model 760) installed on D/V Chikyu. Due to time constraints paleomagnetism measurements were limited to NRM with 5 mT demagnetization, with measurements typically made at 2 cm intervals. […]
    Size:  8705 data points
    https://doi.org/10.1594/PANGAEA.979767 - Score: 6.034
  7. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Color Reflectance (Spectrophotometer) of IODP Hole 386-M0087B
    Abstract:  Color reflectance spectrophotometry and colorimetry data from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The data where obtained during the onshore phase of expedition 386 which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting of the core sections, each archive half was scanned by the Tri-Sensor Core Logger (TSCL; NS Design) including a noncontact imaging spectrophotometer (MetaVue VS3200; X-Rite), recording data at 2-cm sampling interval. The obtained data is represented in the L*a*b* color coordinate system, where L* is a total reflectance index ranging 0%–100%, a* is green (<0) to red (>0) chromaticity, and b* is blue (<0) to yellow (>0) chromaticity. L*a*b* values were transferred into RGB values using the MATLAB routine lab2rgb. […]
    Size:  35492 data points
    https://doi.org/10.1594/PANGAEA.975171 - Score: 6.034
  8. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Description of lithologic section units of IODP Hole 386-M0083D
    Abstract:  Description of lithologic section units from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The content of this dataset is based on the visual core descriptions (VCD) done by sedimentologists during the onshore phase of expedition 386 (2022-02-14 – 2022-03-15 onboard D/V Chikyu). For digitalization of the information, content of the hand-drawn VCD sheets was transferred into the Drilling Information System database. The present dataset forms the basis for the digital lithologic columns and composite plots archived under the titles "Visual core description of IODP Hole 386-M0083D". […]
    Size:  2535 data points
    https://doi.org/10.1594/PANGAEA.978095 - Score: 6.034
  9. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Moisture and density (MAD) from IODP Hole 386-M0085B
    Abstract:  Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for MAD measurements (bulk density, dry density, grain density, water content, porosity, and void ratio) were taken from the work halves using 10 cubic centimetre syringes at an approx. down-core resolution of every 2 meters. Sampling depths were adapted and slightly modified for layers of special interest, such as tephras. Samples were processed and measured directly after sampling onboard Chikyu. For the measurements themselves samples were transferred to glass beakers of known weight and volume. […]
    Size:  81 data points
    https://doi.org/10.1594/PANGAEA.977446 - Score: 6.034
  10. Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0090A
    Abstract:  Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. […]
    Size:  3 data points
    https://doi.org/10.1594/PANGAEA.975445 - Score: 6.034

<< PREV | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | NEXT >>

Contact info |Webmaster