|
|
1251 datasets found! (Query time: 3 ms)
<< PREV | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | NEXT >>
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (handheld penetrometer) from IODP Hole 386-M0084E
| Abstract: |
Shear strength from handheld penetrometer of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a handheld (pocket) penetrometer equipped with a 10 mm diameter tip. The tip was pushed 6.3 mm perpendicular to the split core surface with the measuring pin downward until the groove marked on the tip was even with the level of the core surface. The resulting resistance (compressive strength) was read from the device and used to calculate undrained shear strength. At each measurement depth, three measurements were conducted and the resulting undrained shear strength averaged. […] |
| Size: |
4 data points |
https://doi.org/10.1594/PANGAEA.977724 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Description of lithologic section units of IODP Hole 386-M0093A
| Abstract: |
Description of lithologic section units from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The content of this dataset is based on the visual core descriptions (VCD) done by sedimentologists during the onshore phase of expedition 386 (2022-02-14 – 2022-03-15 onboard D/V Chikyu). For digitalization of the information, content of the hand-drawn VCD sheets was transferred into the Drilling Information System database. The present dataset forms the basis for the digital lithologic columns and composite plots archived under the titles "Visual core description of IODP Hole 386-M0093A". […] |
| Size: |
149 data points |
https://doi.org/10.1594/PANGAEA.978143 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-ray diffraction results from IODP Hole 386-M0089A
| Abstract: |
Results of X-ray diffraction (XRD) analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
| Size: |
37 data points |
https://doi.org/10.1594/PANGAEA.978962 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (handheld penetrometer) from IODP Hole 386-M0095B
| Abstract: |
Shear strength from handheld penetrometer of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a handheld (pocket) penetrometer equipped with a 10 mm diameter tip. The tip was pushed 6.3 mm perpendicular to the split core surface with the measuring pin downward until the groove marked on the tip was even with the level of the core surface. The resulting resistance (compressive strength) was read from the device and used to calculate undrained shear strength. At each measurement depth, three measurements were conducted and the resulting undrained shear strength averaged. […] |
| Size: |
56 data points |
https://doi.org/10.1594/PANGAEA.977761 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Smear slide microscopy images of IODP Hole 386-M0093A
| Abstract: |
Collection of smear slide microscopy images from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. This was followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the offshore phase, smear slides were prepared from paleontology samples collected with a tip-cut syringe from section ends every 5 m. During the onshore phase, smear slides samples were collected every 2 m to complement visual core description observations and identify the composition of fine-grained sediment. The smear slides were prepared by putting a small amount of sediment on a glass slide mixed with distilled water. The slide was subsequently evaporated on a hot plate, and the dried sample was mounted in Norland Optical Adhesive 61 using ultraviolet light. […] |
| Size: |
12 data points |
https://doi.org/10.1594/PANGAEA.976817 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Smear slide descriptions of IODP Hole 386-M0086B
| Abstract: |
Descriptions of smear slides from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. This was followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the offshore phase, smear slides were prepared from paleontology samples collected with a tip-cut syringe from section ends every 5 m. During the onshore phase, smear slides samples were collected every 2 m to complement visual core description observations and identify the composition of fine-grained sediment. The smear slides were prepared by putting a small amount of sediment on a glass slide mixed with distilled water. The slide was subsequently evaporated on a hot plate, and the dried sample was mounted in Norland Optical Adhesive 61 using ultraviolet light. […] |
| Size: |
385 data points |
https://doi.org/10.1594/PANGAEA.978727 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-Ray fluorescence (XRF) of discrete samples from IODP Hole 386-M0091C
| Abstract: |
Results of X-Ray fluorescence (XRF) on discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
| Size: |
20 data points |
https://doi.org/10.1594/PANGAEA.979603 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-Ray fluorescence (XRF) of discrete samples from IODP Hole 386-M0084B
| Abstract: |
Results of X-Ray fluorescence (XRF) on discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
| Size: |
200 data points |
https://doi.org/10.1594/PANGAEA.979573 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Visual core description of IODP Hole 386-M0093B
| Abstract: |
Collection of visual core description (VCD) sheets (hand drawn originals and digital representations) and lithologic composite plots from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). VCD was performed on unsampled archive halves of split cores, directly after linescan imaging, during the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. The lithology of each core section is represented on the hand drawn VCDs by graphic patterns next to the X-ray CT image of the archive-half core section. Further, a wide variety of features that characterize the sediment are indicated in additional columns. […] |
| Size: |
12 data points |
https://doi.org/10.1594/PANGAEA.976648 - Score: 6.023
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): P-wave velocity of discrete samples (DPW) from IODP Hole 386-M0090A
| Abstract: |
P-wave velocity data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for P-wave velocity measurements were taken from the work halves approx. every 2 meter down core using syringes with an inner diameter of 2 cm. Samples measured 2.5–3 cm long for a sample volume of ~10 cubic centimetres. Samples were then shipped to the European Petrophysics Consortium (EPC) laboratory at the University of Leicester (UK) for processing. Measurements were performed with a Geotek P-wave logger for discrete samples (PWL-D). Measurements were attempted for each sample, however, the unconsolidated lithology of some samples proved unsuitable for the instrument (e.g. too soupy or too friable to be placed between the transducers). […] |
| Size: |
3 data points |
https://doi.org/10.1594/PANGAEA.975305 - Score: 6.023
<< PREV | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | NEXT >>
|
