|
|
1252 datasets found! (Query time: 8 ms)
<< PREV | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | NEXT >>
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (shear vane) from IODP Hole 386-M0082A
| Abstract: |
Shear strength from automated shear vane (AVS) of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a Wykeham-Farrance AVS. The apparatus consists of four vanes perpendicular to each other that are inserted in the sediment to their full length while attempting to minimize disturbance to the sediment. A motor loads a helical torsion spring and the bottom of the spring is united to the vane. Therefore, the bottom deflection of the spring records the angular displacement of the sediment, from which undrained shear strength has been calculated. […] |
| Size: |
2 data points |
https://doi.org/10.1594/PANGAEA.975348 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0082D
| Abstract: |
Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. […] |
| Size: |
108 data points |
https://doi.org/10.1594/PANGAEA.975415 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-ray CT images of IODP Hole 386-M0091A
| Abstract: |
Collection of X-ray Computed Tomography (CT) images from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. This was followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. X-ray CT scanning was performed on whole-round sections on board D/V Chikyu in July 2021, after the offshore phase and prior to the onshore phase, using a Discovery CT 750HD (GE Medical Systems) that produces 32 0.625 mm thick slice images every 0.4 s. Data generated for each core consist of core-axis-normal planes of X-ray attenuation values that are 512 × 512 pixels in size. Data were stored on the server as DICOM formatted files. The DICOM files were restructured to create 3-D images for further investigation. […] |
| Size: |
4 data points |
https://doi.org/10.1594/PANGAEA.977594 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Total carbon, total organic carbon, total inorganic carbon and total sulfur (solid-phase discrete samples) from IODP Hole 386-M0084F
| Abstract: |
Total carbon (TC), total organic carbon (TOC), total inorganic carbon (TIC) and total sulfur (TS) from solid-phase discrete samples of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
| Size: |
126 data points |
https://doi.org/10.1594/PANGAEA.975614 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): P-wave velocity of discrete samples (DPW) from IODP Hole 386-M0090A
| Abstract: |
P-wave velocity data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for P-wave velocity measurements were taken from the work halves approx. every 2 meter down core using syringes with an inner diameter of 2 cm. Samples measured 2.5–3 cm long for a sample volume of ~10 cubic centimetres. Samples were then shipped to the European Petrophysics Consortium (EPC) laboratory at the University of Leicester (UK) for processing. Measurements were performed with a Geotek P-wave logger for discrete samples (PWL-D). Measurements were attempted for each sample, however, the unconsolidated lithology of some samples proved unsuitable for the instrument (e.g. too soupy or too friable to be placed between the transducers). […] |
| Size: |
3 data points |
https://doi.org/10.1594/PANGAEA.975305 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): P-wave velocity of discrete samples (DPW) from IODP Hole 386-M0083F
| Abstract: |
P-wave velocity data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for P-wave velocity measurements were taken from the work halves approx. every 2 meter down core using syringes with an inner diameter of 2 cm. Samples measured 2.5–3 cm long for a sample volume of ~10 cubic centimetres. Samples were then shipped to the European Petrophysics Consortium (EPC) laboratory at the University of Leicester (UK) for processing. Measurements were performed with a Geotek P-wave logger for discrete samples (PWL-D). Measurements were attempted for each sample, however, the unconsolidated lithology of some samples proved unsuitable for the instrument (e.g. too soupy or too friable to be placed between the transducers). […] |
| Size: |
54 data points |
https://doi.org/10.1594/PANGAEA.975281 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (shear vane) from IODP Hole 386-M0083A
| Abstract: |
Shear strength from automated shear vane (AVS) of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections using a Wykeham-Farrance AVS. The apparatus consists of four vanes perpendicular to each other that are inserted in the sediment to their full length while attempting to minimize disturbance to the sediment. A motor loads a helical torsion spring and the bottom of the spring is united to the vane. Therefore, the bottom deflection of the spring records the angular displacement of the sediment, from which undrained shear strength has been calculated. […] |
| Size: |
2 data points |
https://doi.org/10.1594/PANGAEA.975353 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0081C
| Abstract: |
Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. […] |
| Size: |
3 data points |
https://doi.org/10.1594/PANGAEA.975408 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-ray CT images of IODP Hole 386-M0084D
| Abstract: |
Collection of X-ray Computed Tomography (CT) images from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. This was followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. X-ray CT scanning was performed on whole-round sections on board D/V Chikyu in July 2021, after the offshore phase and prior to the onshore phase, using a Discovery CT 750HD (GE Medical Systems) that produces 32 0.625 mm thick slice images every 0.4 s. Data generated for each core consist of core-axis-normal planes of X-ray attenuation values that are 512 × 512 pixels in size. Data were stored on the server as DICOM formatted files. The DICOM files were restructured to create 3-D images for further investigation. […] |
| Size: |
144 data points |
https://doi.org/10.1594/PANGAEA.977569 - Score: 6.024
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Moisture and density (MAD) from IODP Hole 386-M0082C
| Abstract: |
Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for MAD measurements (bulk density, dry density, grain density, water content, porosity, and void ratio) were taken from the work halves using 10 cubic centimetre syringes at an approx. down-core resolution of every 2 meters. Sampling depths were adapted and slightly modified for layers of special interest, such as tephras. Samples were processed and measured directly after sampling onboard Chikyu. For the measurements themselves samples were transferred to glass beakers of known weight and volume. […] |
| Size: |
9 data points |
https://doi.org/10.1594/PANGAEA.977431 - Score: 6.024
<< PREV | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60 | 61 | NEXT >>
|
