|
|
1251 datasets found! (Query time: 5 ms)
<< PREV | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | NEXT >>
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Shear strength (fall cone) from IODP Hole 386-M0083E
| Abstract: |
Undrained shear strength data from fall cone testing of the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). This dataset was obtained at the end of the core processing workflow during the third phase (Personal Sampling Party, PSP) of expedition 386, which took place between 2022-11-15 – 2022-11-30 onboard D/V Chikyu. Measurements were performed on the work halves of core sections at an interval of approx. 1 meter using an ELE International fall cone penetrometer (STANDARD BS1377) with the following cone specifications: 35 mm cone, 30 degrees angle, around 30 g, stainless steel, 3.25 (+/-0.05) mm rod diameter. The fall cone penetrometer measures the penetration of a cone as it free falls and embeds itself in the sediment. During testing, the cone (pointing downward) was lowered, so that it just touched the surface of the split core before it was locked in place with the dial gauge reading noted. […] |
| Size: |
3 data points |
https://doi.org/10.1594/PANGAEA.975420 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Core-section summary for IODP Site 386-M0094
| Abstract: |
List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. Cores have been acquired by the use of a Giant Piston Coring (GPC) System. Recovered cores were divided into approx. 1 m long sections that are numbered sequentially from the top, starting at 1. Following IODP convention, material recovered from the core catcher of a sedimentary core is treated as a separate section labelled CC for core catcher and placed below the last section recovered from the core barrel. Most core catcher sections were placed in a bag due to their consistency. The IODP standard naming of sections includes the following information: expedition number, hole, core, core type and section. […] |
| Size: |
151 data points |
https://doi.org/10.1594/PANGAEA.974967 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Interstitial water geochemistry results of IODP Hole 386-M0082C
| Abstract: |
Results of interstitial water (IW) geochemistry analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. Sampling for IW geochemistry took place offshore immediately upon core recovery using Rhizon samplers. A total amount of approximately 15 mL IW per sample were extracted from the core sections over a maximum rhizon retention time of 6 hours. IW main samples were subsequently split into as many as seven fractions for the following IODP standard measurements: sulfide (1.5 mL IW + 0.6 mL ZnAc 2.5%), salinity (0.5–1.5 mL), pH and alkalinity (3–4 mL), ammonium (0.5–1.5 mL), cations (3 mL IW + 0.03 mL HNO3), and anions (3 mL). […] |
| Size: |
60 data points |
https://doi.org/10.1594/PANGAEA.979626 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Line scan images of IODP Hole 386-M0094B
| Abstract: |
Collection of line scan images from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. Images were obtained during the onshore phase of the expedition, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu. After longitudinal splitting high-resolution (100 pixels/cm) images of each core sections archive half was captured using the Tri-Sensor Core Logger (TSCL; NS Design). The camera provides a 16-bit red-green-blue color (48-bit) TIFF file, which were converted to JPG files for publication purposes. The RGB data derived from each image for each section are published under titles "Color data (RGB) of IODP Hole 386-M0094B". […] |
| Size: |
76 data points |
https://doi.org/10.1594/PANGAEA.976217 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-ray diffraction results from IODP Hole 386-M0083C
| Abstract: |
Results of X-ray diffraction (XRD) analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
| Size: |
37 data points |
https://doi.org/10.1594/PANGAEA.978935 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Smear slide microscopy images of IODP Hole 386-M0093B
| Abstract: |
Collection of smear slide microscopy images from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan. This was followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the offshore phase, smear slides were prepared from paleontology samples collected with a tip-cut syringe from section ends every 5 m. During the onshore phase, smear slides samples were collected every 2 m to complement visual core description observations and identify the composition of fine-grained sediment. The smear slides were prepared by putting a small amount of sediment on a glass slide mixed with distilled water. The slide was subsequently evaporated on a hot plate, and the dried sample was mounted in Norland Optical Adhesive 61 using ultraviolet light. […] |
| Size: |
156 data points |
https://doi.org/10.1594/PANGAEA.976818 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Description of lithologic section units of IODP Hole 386-M0090C
| Abstract: |
Description of lithologic section units from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The content of this dataset is based on the visual core descriptions (VCD) done by sedimentologists during the onshore phase of expedition 386 (2022-02-14 – 2022-03-15 onboard D/V Chikyu). For digitalization of the information, content of the hand-drawn VCD sheets was transferred into the Drilling Information System database. The present dataset forms the basis for the digital lithologic columns and composite plots archived under the titles "Visual core description of IODP Hole 386-M0090C". […] |
| Size: |
160 data points |
https://doi.org/10.1594/PANGAEA.978129 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Moisture and density (MAD) from IODP Hole 386-M0090D
| Abstract: |
Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). During the onshore phase of expedition 386, which took place between 2022-02-14 – 2022-03-15 onboard D/V Chikyu, discrete samples for MAD measurements (bulk density, dry density, grain density, water content, porosity, and void ratio) were taken from the work halves using 10 cubic centimetre syringes at an approx. down-core resolution of every 2 meters. Sampling depths were adapted and slightly modified for layers of special interest, such as tephras. Samples were processed and measured directly after sampling onboard Chikyu. For the measurements themselves samples were transferred to glass beakers of known weight and volume. […] |
| Size: |
144 data points |
https://doi.org/10.1594/PANGAEA.977466 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): X-ray diffraction results from IODP Hole 386-M0094B
| Abstract: |
Results of X-ray diffraction (XRD) analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the onshore phase a set of solid-phase samples, with a volume of approx. 10 cubic centimeters each, were taken with the purpose to be later on split into aliquots for the following three analyses: X-ray diffraction, carbon and X-ray fluorescence. The bulk solid-phase samples were taken from the work halves of core sections at about one sample per meter on average. […] |
| Size: |
370 data points |
https://doi.org/10.1594/PANGAEA.978981 - Score: 5.95
-
Strasser, M; Ikehara, K; Everest, JD et al. (2025): Foraminifera occurrences of IODP Hole 386-M0082B
| Abstract: |
Results of Foraminifera assemblage analyses from the above given hole of International Ocean Discovery Program (IODP) Expedition 386 (Japan Trench Paleoseismology). The offshore phase of this expedition took place between 2021-04-13 and 2021-06-01 onboard Japanese R/V Kaimei from and to Yokosuka, Japan, followed by an onshore phase onboard D/V Chikyu between 2022-02-14 – 2022-03-15. During the offshore phase, micropaleontology samples were taken from the end of split cores at 5 m intervals. During the onshore phase approximately 2 cubic centimetres of sediment from each of these samples were analysed for foraminifera. After drying overnight in a ~40°C oven, samples were disaggregated in a solution of deionized water, Calgon, and H2O2 to ensure removal of clay-sized particles. Samples were then wet sieved through a 63 μm mesh sieve and rinsed with deionized water. The coarse fraction was placed on filter paper in an oven at ~40°C until it dried completely. […] |
| Size: |
138 data points |
https://doi.org/10.1594/PANGAEA.979361 - Score: 5.95
<< PREV | 80 | 81 | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | 93 | 94 | 95 | 96 | 97 | 98 | 99 | NEXT >>
|
