15 datasets found! (Query time: 2 ms)

<< PREV | 1 | 2 | NEXT >>

1. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0104

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   304 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985187 - Score: 11.061
2. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0101

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   526 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985184 - Score: 11.061
3. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0109

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   96 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985193 - Score: 11.061
4. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0103

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   266 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985186 - Score: 11.061
5. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0096

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   144 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985179 - Score: 10.825
6. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0108

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   323 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985192 - Score: 10.825
7. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0099

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   918 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985182 - Score: 10.789
8. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0106

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   108 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985190 - Score: 10.789
9. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0100

   Abstract:

   List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

   Size:

   117 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985183 - Score: 10.608
10. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Core-section summary for IODP Site 389-M0107

    Abstract:

    List of recovered core sections from the above given site of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs) during the offshore phase of this expedition. The offshore phase took place between 2023-08-31 and 2023-10-31 onboard multipurpose vessel MMA Valour sailing from and to Barbers Point Harbor, Hawai'i, USA. Cores have been acquired by Benthic's fifth-generation Portable Remotely Operated Drill (PROD5). Following IODP convention, the 2.75 m liners extracted from each core barrel were cut into one or two sections (depending on core recovery) with a maximum section length of 1.5 m. Two types of liner were used during Expedition 389; Aluminum and polycarbonate liners, each requiring different treatment at this initial stage. Material recovered from the core catcher is treated as a separate section labelled "CC" for core catcher and placed below the last section recovered from the core barrel. […]

    Size:

    108 data points

    https://doi.pangaea.de/10.1594/PANGAEA.985191 - Score: 10.608

<< PREV | 1 | 2 | NEXT >>