26 datasets found! (Query time: 13 ms)

<< PREV | 1 | 2 | 3 | NEXT >>

1. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0110B

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   56 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985720 - Score: 13.355
2. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0096D

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   14 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985696 - Score: 13.355
3. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0096A

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   7 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985695 - Score: 13.355
4. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0101B

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   112 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985711 - Score: 13.355
5. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0099C

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   105 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985705 - Score: 13.355
6. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0106A

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   7 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985717 - Score: 13.355
7. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0104A

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   182 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985715 - Score: 13.355
8. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0099B

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   21 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985704 - Score: 13.038
9. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0105A

   Abstract:

   Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

   Size:

   42 data points

   https://doi.pangaea.de/10.1594/PANGAEA.985716 - Score: 13.038
10. Webster, JM; Ravelo, AC; Grant, H et al. (2025): Moisture and density (MAD) from IODP Hole 389-M0110A

    Abstract:

    Moisture and density (MAD) data from discrete samples from the above given hole of International Ocean Discovery Program (IODP) Expedition 389 (Hawaiian Drowned Reefs). MAD measurements were performed on the same samples as P-wave velocity (the same sample was used for both measurements). These discrete samples were taken during the onshore phase of expedition 389, which took place between 2025-02-06 to 2025-02-26 at the Bremen Core Repository (BCR) hosted at MARUM – Center for Marine Environmental Sciences, University of Bremen. Where core quality allowed cylindrical plugs were drilled perpendicular to the split core surface at an interval of one sample per core (approx. every 1.5 meter). MAD properties (bulk density, dry density, grain density, water content, porosity, and void ratio) were determined from measurements of the wet and dry mass of the sampled core plugs as well as their dry volumes. Drying took place in a convection oven at 105°±5°C for 24 hours. […]

    Size:

    49 data points

    https://doi.pangaea.de/10.1594/PANGAEA.985719 - Score: 13.038

<< PREV | 1 | 2 | 3 | NEXT >>